Construction of a Sustainable Nuclear Waste Disposal Facility_Crimson Publishers

Construction of a Sustainable Nuclear Waste Disposal Facility by Ahmet Erdal Osmanlioglu in Crimson publishers: Open Journal of Civil Engineering

The basic concept for disposing high-level radioactive waste or spent fuel is to dispose of these types of waste in an underground waste disposal facility. In order to clarify the technical methods used to assure the parameters required for design studies of disposal system should be carried out. At the beginning, the basic conditions required for disposal facility are established and disposal concept is developed through technical analysis. Concerning the host rock formation, the mechanical stability of the waste galleries in deep underground and the influence of heat generated from waste on the host rock are analyzed. According to results of the analysis, a design study of the cross section underground facility layout is performed. In addition, an assessment of performing construction is carried out. Technological issues concerning the handling of waste forms and the backfilling of waste galleries should be taken into consideration. In this paper, several technical parameters are identified and assessed as important design parameters for a sustainable nuclear waste disposal facility.


For more open access journals in Crimson Publishers 
please click on the link https://crimsonpublishersresearch.com/

For more articles in Open Journal of Civil Engineering 
Please click on the link https://crimsonpublishers.com/acet/

Follow On Publons  : https://publons.com/publisher/6342/crimson-publishers
Follow On Linkedin : https://www.linkedin.com/company/crimsonpublishers

Comments

Post a Comment

Popular posts from this blog

Scanning Electron Microscope Configuration of Recycled Carbon Fiber Composites: Mini Review_Crimson Publishers

Image
Scanning Electron Microscope Configuration of Recycled Carbon Fiber Composites: Mini Review by Seyed Hossein Mamanpush in Crimson Publishers : Open Journal of Civil Engineering Carbon fiber composites (CFCs) were mechanically refined and classified the scanning electron microscope (SEM) configuration of untreated and heat-treated mechanically recycled carbon fiber epoxy and carbon fiber vinyl ester composite was examined by using scanning electron microscopy (SEM). SEM Results indicate that the main defects in the structure of recycled CFCs are broken fibers, fiber pull-out, fiber-matrix separation. Also Comparing SEM of untreated and heat-treated recycled CFC indicates that there is no significant difference between their micrographs. https://crimsonpublishers.com/acet/fulltext/ACET.000542.php For more open access journals in   Crimson Publishers   please click on the link   https://crimsonpublishersresearch.com/ For more articles in  Open Journal ...
Read more

Tensile Behavior of Single Cast-in Anchors in Plastic Hinge Zones_Crimson Publishers

Image
Tensile Behavior of Single Cast-in Anchors in Plastic Hinge Zones by Jian Zhao in  Crimson Publishers :  Advancements in Civil Engineering & Technology This paper presents two tests of ¾-in. diameter cast-in anchors embedded in the plastic hinge zone of reinforced concrete columns. Design codes, such as ACI 318-11, do not allow concrete anchors in concrete that could be substantially damaged during an earthquake unless special reinforcement is provided. Recent studies have concluded that key role of anchor reinforcement, in addition to carrying the forces from the anchors, is to protect concrete around the anchors from splitting, breaking out, and crushing. The anchor reinforcement in this study was designed according to the recommendation. The column specimens were subjected to quasi-static cyclic loading before the test anchors were loaded in tension. Ductile steel fracture was achieved in both test anchors despite cracks and concrete spalling occurred to the concret...
Read more

Creation of Formula to Predict Time and Cost Benefit by Using 5D BIM Rather than Traditional Method of Construction_Crimson Publishers

Image
Creation of Formula to Predict Time and Cost Benefit by Using 5D BIM Rather than Traditional Method of Construction by Arif khan in  Crimson Publishers :  Advancements in Civil Engineering & Technology Building Information Modeling (BIM) is becoming a well-known established collaboration process in the construction industry. Owners are increasingly requiring BIM services from construction managers, architects and engineering firms. Many international construction firms are now investing in “BIM” technologies during bidding, preconstruction, construction and post construction. The goal of this research is to understand and examine the uses and benefits of 5D BIM for construction project of Pakistan. There are three objectives to this research. First is to make comparative analysis of an existing high rise building with reference to scheduling and cost as done by traditional method. Second is to develop 5D model of high rise building with help of autodesk revit and auto...
Read more