Carbon Nanofiber Aggregate Sensors for Sustaining Resilience of Civil Infrastructures to Multi-Hazards_Crimson Publishers

Carbon Nanofiber Aggregate Sensors for Sustaining Resilience of Civil Infrastructures to Multi-Hazards by Mo YL in Crimson Publishers: Advancements in Civil Engineering & Technology

Natural disasters (earthquakes, hurricanes, tornadoes. and floods) or man-made disasters or accidents (missile/aircraft impacts, fires. and explosions) lead to substantial damage on critical infrastructures and communities and have social, economic, and environmental consequences. As the safety of civil infrastructures is critically important, effective structural health monitoring (SHM) systems of infrastructures should be developed to avoid and mitigate the risks caused by various types of hazards. Carbon Nanofiber Aggregates (CNFAs) developed at the University of Houston are piezoelectric aggregates that can respond uniquely to different multi-hazards. This unique response makes this a sensor capable of being used in the Structural Health Monitoring (SHM) of civil infrastructures in each of the multi-hazards. This paper explains how CNFAs can be used for multi-hazard monitoring and discusses the ultra-low noise, high sensitivity of CNFA sensor electrical interfaces, radiation-tolerant wired and wireless communication capabilities of the CNFA sensor which leads to the very possible development of the wireless CNFAs’ real-time SHM system for sustaining resilience of civil infrastructures to multi-hazards.


high impact journals in Crimson Publishers?
please click on the link https://www.quora.com/What-are-the-high-impact-journals-in-Crimson-Publishers/

For more articles in Open Journal of Civil Engineering 
Please click on the link https://crimsonpublishers.com/acet/

Follow On Publons  : https://publons.com/publisher/6342/crimson-publishers
Follow On Linkedin : https://www.linkedin.com/company/crimsonpublishers

Comments

Post a Comment

Popular posts from this blog

Scanning Electron Microscope Configuration of Recycled Carbon Fiber Composites: Mini Review_Crimson Publishers

Image
Scanning Electron Microscope Configuration of Recycled Carbon Fiber Composites: Mini Review by Seyed Hossein Mamanpush in Crimson Publishers : Open Journal of Civil Engineering Carbon fiber composites (CFCs) were mechanically refined and classified the scanning electron microscope (SEM) configuration of untreated and heat-treated mechanically recycled carbon fiber epoxy and carbon fiber vinyl ester composite was examined by using scanning electron microscopy (SEM). SEM Results indicate that the main defects in the structure of recycled CFCs are broken fibers, fiber pull-out, fiber-matrix separation. Also Comparing SEM of untreated and heat-treated recycled CFC indicates that there is no significant difference between their micrographs. https://crimsonpublishers.com/acet/fulltext/ACET.000542.php For more open access journals in   Crimson Publishers   please click on the link   https://crimsonpublishersresearch.com/ For more articles in  Open Journal ...
Read more

Tensile Behavior of Single Cast-in Anchors in Plastic Hinge Zones_Crimson Publishers

Image
Tensile Behavior of Single Cast-in Anchors in Plastic Hinge Zones by Jian Zhao in  Crimson Publishers :  Advancements in Civil Engineering & Technology This paper presents two tests of ¾-in. diameter cast-in anchors embedded in the plastic hinge zone of reinforced concrete columns. Design codes, such as ACI 318-11, do not allow concrete anchors in concrete that could be substantially damaged during an earthquake unless special reinforcement is provided. Recent studies have concluded that key role of anchor reinforcement, in addition to carrying the forces from the anchors, is to protect concrete around the anchors from splitting, breaking out, and crushing. The anchor reinforcement in this study was designed according to the recommendation. The column specimens were subjected to quasi-static cyclic loading before the test anchors were loaded in tension. Ductile steel fracture was achieved in both test anchors despite cracks and concrete spalling occurred to the concret...
Read more

Creation of Formula to Predict Time and Cost Benefit by Using 5D BIM Rather than Traditional Method of Construction_Crimson Publishers

Image
Creation of Formula to Predict Time and Cost Benefit by Using 5D BIM Rather than Traditional Method of Construction by Arif khan in  Crimson Publishers :  Advancements in Civil Engineering & Technology Building Information Modeling (BIM) is becoming a well-known established collaboration process in the construction industry. Owners are increasingly requiring BIM services from construction managers, architects and engineering firms. Many international construction firms are now investing in “BIM” technologies during bidding, preconstruction, construction and post construction. The goal of this research is to understand and examine the uses and benefits of 5D BIM for construction project of Pakistan. There are three objectives to this research. First is to make comparative analysis of an existing high rise building with reference to scheduling and cost as done by traditional method. Second is to develop 5D model of high rise building with help of autodesk revit and auto...
Read more